Salta al contenuto principale

G&G TR16 R4 Airsoft Reassembly

Inglese
Italiano

Traduzione in corso passo 25

Passo 25
G&G TR16 R4 Airsoft Reassembly: passo 0, immagine 1 di 3 G&G TR16 R4 Airsoft Reassembly: passo 0, immagine 2 di 3 G&G TR16 R4 Airsoft Reassembly: passo 0, immagine 3 di 3
  • If the rails where removed front. Now is a good time to put them back on.

  • Pole back the delt ring as shown.

  • Place the upper rail on first and the lower piece.

  • Final screw down the screw located on the top to secure everything in place.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.