Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.
Cosa ti serve
-
-
Remove the four exterior screws located under controller and on the handle.
-
Remove the five screws shown, and then carefully remove top plate. Electrical components are attached to top plate.
-
-
-
Disconnect circuit board from power leads, and install new circuit board.
-
-
-
-
Remove the four exterior screws to gain access to inner components. These screws are located on the bottom of the controller and on the handle.
-
Remove the five inner screws to access the Buttons
-
-
-
Remove top plate carefully so that none of the electrical components are damaged.
-
Remove broken button and insert new button into the mounting holes.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.