Aggiusta la tua roba Comunità Store

iRobot Roomba e5 Caster Wheel Replacement

Introduzione

This guide will show you how to access the caster wheel on the iRobot Roomba e5 so that it can be cleaned or replaced. Most of the time this wheel only needs to be cleaned. Debris may get caught not allowing the wheel to rotate. Often, hair gets caught in the wheel.

Cosa ti serve

  1. iRobot Roomba e5 Caster Wheel Replacement, Caster Wheel: passo 1, immagine 1 di 2 iRobot Roomba e5 Caster Wheel Replacement, Caster Wheel: passo 1, immagine 2 di 2

    • Use an opening tool to pry beneath the grey ring on each side of the wheel until it pops out.

    Modifica

  2. iRobot Roomba e5 Caster Wheel Replacement: passo 2, immagine 1 di 2 iRobot Roomba e5 Caster Wheel Replacement: passo 2, immagine 2 di 2

    • Pull the wheel out of the vacuum.

    • Dirt and debris can be caught under the wheel and may lead to decreased mobility. Try cleaning out the debris before replacing the wheel.

    Modifica

  4. iRobot Roomba e5 Caster Wheel Replacement: passo 3, immagine 1 di 3 iRobot Roomba e5 Caster Wheel Replacement: passo 3, immagine 2 di 3 iRobot Roomba e5 Caster Wheel Replacement: passo 3, immagine 3 di 3

    • Remove two 10 mm screws from the wheel housing using a Phillips #1 screwdriver.

    Modifica

  5. iRobot Roomba e5 Caster Wheel Replacement: passo 4, immagine 1 di 1

    • Pull the wheel housing out of the vacuum.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 4

Tutti i Tempi: 316