Aggiusta la tua roba Comunità Store

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

iRobot Roomba 980 Motherboard Replacement

Introduzione

Replacing the motherboard is a very long process and if not done carefully it could damage the device irreparably. Proceed with caution when handling the connectors and pins that attach the motherboard to the rest of the device.

Cosa ti serve

  1. iRobot Roomba 980 Motherboard Replacement, Battery: passo 1, immagine 1 di 1

    • Flip over the device and remove the two 11.5 mm screws using the Phillips #1 screwdriver.

    Traduci

  2. iRobot Roomba 980 Motherboard Replacement: passo 2, immagine 1 di 2 iRobot Roomba 980 Motherboard Replacement: passo 2, immagine 2 di 2

    • Unscrew the back plate using a Phillips #1 screwdriver.

    • Carefully lift the panel up once the screws are removed.

    Traduci

  3. iRobot Roomba 980 Motherboard Replacement: passo 3, immagine 1 di 2 iRobot Roomba 980 Motherboard Replacement: passo 3, immagine 2 di 2

    • With both hands, grab the two black tabs on each end of the battery.

    • Pull the tabs upwards to remove the battery.

    Traduci

  4. iRobot Roomba 980 Motherboard Replacement, Motherboard: passo 4, immagine 1 di 2 iRobot Roomba 980 Motherboard Replacement, Motherboard: passo 4, immagine 2 di 2

    • Remove the dust bin by pressing down on the rear button on the device.

    • Pull the bin towards you to remove it.

    Traduci

  5. iRobot Roomba 980 Motherboard Replacement: passo 5, immagine 1 di 2 iRobot Roomba 980 Motherboard Replacement: passo 5, immagine 2 di 2

    • Insert the opening tool in the back of the device under the wedge.

    • Slowly pry the plate loose and lift it from the device.

    • The face plate is only designed to be removed back to front.

    Traduci

  6. iRobot Roomba 980 Motherboard Replacement: passo 6, immagine 1 di 2 iRobot Roomba 980 Motherboard Replacement: passo 6, immagine 2 di 2

    • Loosen the screw holding the side brush in place.

    • The screw is attached to the side brush and does not come out completely.

    • Lift the side brush.

    Traduci

  8. iRobot Roomba 980 Motherboard Replacement: passo 7, immagine 1 di 2 iRobot Roomba 980 Motherboard Replacement: passo 7, immagine 2 di 2

    • Remove the (2) 11.5mm Phillips #1 screws holding down the bottom plate.

    • Carefully lift the bottom plate.

    Traduci

  9. iRobot Roomba 980 Motherboard Replacement: passo 8, immagine 1 di 3 iRobot Roomba 980 Motherboard Replacement: passo 8, immagine 2 di 3 iRobot Roomba 980 Motherboard Replacement: passo 8, immagine 3 di 3

    • Remove the Brush Module for greater ease of access.

    • Remove the (4) 15.8mm gold screws around the brush module using the Phillips #1 screwdriver.

    • Lift the brush module carefully using both hands.

    Traduci

  10. iRobot Roomba 980 Motherboard Replacement: passo 9, immagine 1 di 3 iRobot Roomba 980 Motherboard Replacement: passo 9, immagine 2 di 3 iRobot Roomba 980 Motherboard Replacement: passo 9, immagine 3 di 3

    • Remove 2-side wheels for greater ease of access.

    • Locate the (3) three 15.8mm gold Phillips #1 screws and unscrew them.

    • Lift the wheel module removing it from the vacuum.

    • Remove the other wheel by repeating these steps.

    Traduci

  11. iRobot Roomba 980 Motherboard Replacement: passo 10, immagine 1 di 2 iRobot Roomba 980 Motherboard Replacement: passo 10, immagine 2 di 2

    • Remove the (10) ten 6.1mm silver screws.

    • Lift the bottom guard off the front sensor panel by pulling it upwards.

    Traduci

  12. iRobot Roomba 980 Motherboard Replacement: passo 11, immagine 1 di 2 iRobot Roomba 980 Motherboard Replacement: passo 11, immagine 2 di 2

    • Lift the 2 corner guards at the rear of the device by lifting it and popping them out.

    • Pull the front sensor away slowly from the vacuum.

    • The cable connecting the front sensor to the Roomba is delicate, so proceed with caution.

    Traduci

  13. iRobot Roomba 980 Motherboard Replacement: passo 12, immagine 1 di 1

    • Flip the sensor over and remove the (2) two 3.8mm silver screws holding the sensor to the panel.

    • Once removed, pull the panel away carefully.

    Traduci

  14. iRobot Roomba 980 Motherboard Replacement: passo 13, immagine 1 di 2 iRobot Roomba 980 Motherboard Replacement: passo 13, immagine 2 di 2

    • Remove the (14) fourteen 6.6mm black screws shown in the pictures that are holding down the top plate.

    • Push the lip back towards the logo to expose and remove the (2) two 6.6mm black screws found under it.

    Traduci

  15. iRobot Roomba 980 Motherboard Replacement: passo 14, immagine 1 di 2 iRobot Roomba 980 Motherboard Replacement: passo 14, immagine 2 di 2

    • Lift the top plate slowly being careful not to damage the vacuum components while exposing the motherboard.

    Traduci

  16. iRobot Roomba 980 Motherboard Replacement: passo 15, immagine 1 di 2 iRobot Roomba 980 Motherboard Replacement: passo 15, immagine 2 di 2

    • Remove the (9) nine 6.4mm silver screws holding the motherboard to the vacuum body and the clear plastic guard.

    • Carefully remove the connector-clips that are attached to the motherboard.

    • Some connectors will be difficult to remove.

    Traduci

  17. iRobot Roomba 980 Motherboard Replacement: passo 16, immagine 1 di 3 iRobot Roomba 980 Motherboard Replacement: passo 16, immagine 2 di 3 iRobot Roomba 980 Motherboard Replacement: passo 16, immagine 3 di 3

    • Using both hands, lift the motherboard connected to the camera away from the device's main motherboard.

    • *IMPORTANT* Only lift it upwards to avoid bending the pins and causing further damage to the device's electronics.

    • Remove the black plastic guard that is placed in between the 2 boards.

    Traduci

  18. iRobot Roomba 980 Motherboard Replacement: passo 17, immagine 1 di 2 iRobot Roomba 980 Motherboard Replacement: passo 17, immagine 2 di 2

    • Lift the main motherboard off the vacuum upward. The screw inserts are holding it in place so it will have to be lifted evenly.

    • Remove the motherboard from your device.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 21 persone hanno completato questa guida.

Autore

con 7 altri collaboratori

Ernesto Rodriguez Romero

Membro da: 09/27/17

965 Reputazione

4 Guide realizzate

Distintivi: 12

+9 altri distintivi

Team

USF Tampa, Team S14-G2, Boczar Fall 2017 Membro di USF Tampa, Team S14-G2, Boczar Fall 2017

USFT-BOCZAR-F17S14G2

4 Membri

5 Guide realizzate

9 Commenti

Thank you for the replacement instructions & pictures…so helpful!

Any idea where I can purchase a roomba 980 motherboard?

LMSterling - Replica

Where can I purchase the roomba 980 motherboard?

Michael Goshorn - Replica

aliexpress my friend

hamilton.gazim -

you don’t need to take out the modules to take out the circuit board

LakeM0nst3r - Replica

If you find a rectangular rubber grommet left over when you’ve finished, it goes in a slot behind the dust bin and you can reinsert it from the outside just by removing the bin first.

James Turner - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 3

Ultimi 7 Giorni: 45

Ultimi 30 Giorni: 160

Tutti i Tempi: 16,676