Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Introduzione

This guide is in case the battery for the iRobot Roomba 980 has failed to work or is performing poorly. It may be defective, damaged during use or reached the end of its charging life-cycle. Replacing the battery is a quick and easy process that will not take much time away from your daily routine.

Parti

Nessuna parte specificata.

  1. Flip over the device and remove the (2)11.5mm screws using the Phillips #1 screwdriver.
    • Flip over the device and remove the (2)11.5mm screws using the Phillips #1 screwdriver.

  2. Unscrew the back plate using a Phillips#1 head screwdriver. Carefully lift the panel up once the screws are removed.
    • Unscrew the back plate using a Phillips#1 head screwdriver.

    • Carefully lift the panel up once the screws are removed.

  3. With both hands, grab the 2 black tabs on each ends of the battery. Pull the tabs upwards to remove the battery.
    • With both hands, grab the 2 black tabs on each ends of the battery.

    • Pull the tabs upwards to remove the battery.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 3 persone hanno completato questa guida.

Brandon Phan

Membro da: 27/09/2017

230 Reputazione

1 Guida realizzata

Team

USF Tampa, Team S14-G2, Boczar Fall 2017 Membro di USF Tampa, Team S14-G2, Boczar Fall 2017

USFT-BOCZAR-F17S14G2

4 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 22

Tutti i Tempi: 1,809