Salta al contenuto principale

iRobot Roomba 805 Motor Replacement

Cosa ti serve

  1. iRobot Roomba 805 Motor Replacement, Side brush: passo 1, immagine 1 di 1
    • Remove the single 6.1mm Phillips #0 screw from the side brush.

  2. iRobot Roomba 805 Motor Replacement: passo 2, immagine 1 di 1
    • Lift the side brush, removing it from the motor.

  3. iRobot Roomba 805 Motor Replacement, Motor: passo 3, immagine 1 di 2 iRobot Roomba 805 Motor Replacement, Motor: passo 3, immagine 2 di 2
    • Remove the battery panel and the two screws behind the wheels.

    • Lift up the back panel and remove it from the Roomba.

  4. iRobot Roomba 805 Motor Replacement: passo 4, immagine 1 di 1
    • Remove the three screws holding down the motor. Be aware one requires a tristar bit and the plastic piece under that screw comes free easily.

    • Once the motor is loose you can pull it up out of the Roomba.

  5. iRobot Roomba 805 Motor Replacement: passo 5, immagine 1 di 3 iRobot Roomba 805 Motor Replacement: passo 5, immagine 2 di 3 iRobot Roomba 805 Motor Replacement: passo 5, immagine 3 di 3
    • Hold the motor by the bottom and the edge of the cap and remove the cap.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Team

Un commento

What is the point of step 5??

overkillx7 - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 20

Tutti i Tempi: 892