Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Press the black circular button on the back end of the Roomba and pull the bin out towards you to remove the vacuum bin.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Lay the vacuum bin down and remove the six 15 mm screws around the outside of the vacuum bin using the Phillips JIS #1 driver.
-
Remove the top of the vacuum bin by pulling it straight up.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the three 10 mm screws that surround the fan using the Phillips JIS #1 driver.
-
Remove the casing that surrounds the fan by pulling it straight up.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Turn over the remainder of the fan casing and remove the single 15mm screw, using the Phillips JIS #1 screwdriver.
-
Remove the casing from the fan and battery component by pulling it straight up.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the small black button from the top of the battery.
-
Annulla: non ho completato questa guida.
Altre 2 persone hanno completato questa guida.