Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Introduzione

Use this guide to replace the Roomba's battery if the device shows signs of a faulty or damaged battery. Signs of a bad battery include an inability to hold charge or a short run time while cleaning. Battery damage can be caused by overuse, or exposure to heat and water.

  1. Flip the Roomba upside down.
    • Flip the Roomba upside down.

    • Unscrew the single 5 mm screw on the yellow side sweeper using the Phillips JIS #1 driver.

  2. Lift the yellow side sweeper, removing it from the device.
    • Lift the yellow side sweeper, removing it from the device.

  3. Kit Manta Driver

    112 bits for every fix.

    Upgrade Your Toolbox

    Kit Manta Driver

    Upgrade Your Toolbox
  4. Using the Phillips JIS #1 driver, remove the four 10 mm screws that hold the back panel in place.
    • Using the Phillips JIS #1 driver, remove the four 10 mm screws that hold the back panel in place.

  5. Lift up the back panel to remove it from the device.
    • Lift up the back panel to remove it from the device.

  6. Lift up the yellow battery by pulling up the green tabs on its side. Handle the battery with care.
    • Lift up the yellow battery by pulling up the green tabs on its side.

    • Handle the battery with care.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 8 persone hanno completato questa guida.

Mairead Blaes

Membro da: 01/10/2015

723 Reputazione

4 Guide realizzate

Team

Cal Poly, Team 1-22, Maness Fall 2015 Membro di Cal Poly, Team 1-22, Maness Fall 2015

CPSU-MANESS-F15S1G22

4 Membri

14 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 7

Ultimi 30 Giorni: 44

Tutti i Tempi: 3,002