Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

iRobot Roomba 551 Battery Replacement

Cosa ti serve

  1. iRobot Roomba 551  Battery Replacement, Side Brush: passo 1, immagine 1 di 1
    • Place your Roomba upside-down on a hard surface.

  2. iRobot Roomba 551  Battery Replacement: passo 2, immagine 1 di 1
    • While holding the side brush in place, use a Phillips #1 screwdriver to remove the 4.5mm screw from the center of the brush.

  3. iRobot Roomba 551  Battery Replacement: passo 3, immagine 1 di 1
    • Gently pull upwards on the brush to remove it.

  4. iRobot Roomba 551  Battery Replacement, Bottom Plate: passo 4, immagine 1 di 1
    • Rotate the Roomba upside-down so the bottom is facing towards you.

  5. iRobot Roomba 551  Battery Replacement: passo 5, immagine 1 di 2 iRobot Roomba 551  Battery Replacement: passo 5, immagine 2 di 2
    • Using a Phillips #2 screwdriver, remove the captive screws that hold the bottom plate in place.

  6. iRobot Roomba 551  Battery Replacement: passo 6, immagine 1 di 1
    • Carefully lift the bottom plate.

    • The battery is only secured in place by the bottom plate, and may fall out once the bottom plate is removed.

  7. iRobot Roomba 551  Battery Replacement, Battery: passo 7, immagine 1 di 2 iRobot Roomba 551  Battery Replacement, Battery: passo 7, immagine 2 di 2
    • Lift and remove the old battery by pulling the tabs on both sides.

    • Gently replace with a new battery.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 6 persone hanno completato questa guida.

Team

Cal Poly, Team 13-14, Regan Winter 2014 Membro di Cal Poly, Team 13-14, Regan Winter 2014

CPSU-REGAN-W14S13G14

4 Membri

19 Guide realizzate

Un commento

Thank you Deborah!

James - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 3

Ultimi 7 Giorni: 27

Ultimi 30 Giorni: 114

Tutti i Tempi: 9,699