Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Widen the small gap between the front and rear case by inserting a metal spudger into the gap near the top of the iPod.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Insert an iPod opening tool into the newly widened gap, and pry the rear case up and away from the front case.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Insert the iPod Shuffle opening tool into the gap between the front and rear case on the same side, at the bottom corner of the iPod.
-
Pry the rear case away from the front case.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Lift the bottom of the rear case and remove it from the rest of the iPod.
-
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.