Aggiusta la tua roba Comunità Store

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

iPod Shuffle 3rd Generation Headphone Jack & Shuffle Switch Replacement

Introduzione

Replace the damaged headphone jack to hear those sweet tunes again.

Cosa ti serve

  1. iPod Shuffle 3rd Generation Headphone Jack & Shuffle Switch Replacement, Rear Case: passo 1, immagine 1 di 1

    • Widen the small gap between the front and rear case by inserting a metal spudger into the gap near the top of the iPod.

    • Be careful when using a metal spudger, as you may scratch the outer case.

    Traduci

  2. iPod Shuffle 3rd Generation Headphone Jack & Shuffle Switch Replacement: passo 2, immagine 1 di 2 iPod Shuffle 3rd Generation Headphone Jack & Shuffle Switch Replacement: passo 2, immagine 2 di 2

    • Insert an iPod opening tool into the newly widened gap, and pry the rear case up and away from the front case.

    Traduci

  3. iPod Shuffle 3rd Generation Headphone Jack & Shuffle Switch Replacement: passo 3, immagine 1 di 1

    • Insert the iPod Shuffle opening tool into the gap between the front and rear case on the same side, at the bottom corner of the iPod.

    • Pry the rear case away from the front case.

    Traduci

  4. iPod Shuffle 3rd Generation Headphone Jack & Shuffle Switch Replacement: passo 4, immagine 1 di 1

    • Lift the bottom of the rear case and remove it from the rest of the iPod.

    Traduci

  6. iPod Shuffle 3rd Generation Headphone Jack & Shuffle Switch Replacement, Logic Board: passo 5, immagine 1 di 1

    • Disconnect the headphone jack and shuffle switch connector by prying it off the logic board with a spudger.

    Traduci

  7. iPod Shuffle 3rd Generation Headphone Jack & Shuffle Switch Replacement: passo 6, immagine 1 di 1

    • Remove the single Phillips screw securing the logic board to the front case.

    Traduci

  8. iPod Shuffle 3rd Generation Headphone Jack & Shuffle Switch Replacement: passo 7, immagine 1 di 1

    • Peel the battery up from the front case with an iPod opening tool.

    • Remove the logic board and battery from the iPod.

    Traduci

  9. iPod Shuffle 3rd Generation Headphone Jack & Shuffle Switch Replacement, Headphone Jack & Shuffle Switch: passo 8, immagine 1 di 1

    • Pry the headphone jack from the front case with an iPod opening tool.

    • Don't attempt to remove the headphone jack yet, it is connected to the shuffle switch.

    Traduci

  10. iPod Shuffle 3rd Generation Headphone Jack & Shuffle Switch Replacement: passo 9, immagine 1 di 1

    • Using the pointed tip of a spudger, push the shuffle switch in to separate it from the front case.

    Traduci

  11. iPod Shuffle 3rd Generation Headphone Jack & Shuffle Switch Replacement: passo 10, immagine 1 di 1

    • Remove the headphone jack and shuffle switch from the front case.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Autore

con 3 altri collaboratori

Matthew Newsom

Membro da: 01/05/10

39.496 Reputazione

67 Guide realizzate

Distintivi: 47

+44 altri distintivi

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 12

Tutti i Tempi: 11,979