iPhone XS Pentalobe Screws Replacement

Introduzione

Use this guide to remove or replace the two screws securing the iPhone XS display panel. These are the only screws on the exterior of the iPhone. They use a five-point design that is unique to Apple, requiring a specialty P2 pentalobe driver for removal.

Cosa ti serve

Passo 1 Pentalobe Screws

iPhone XS Pentalobe Screws Replacement, Pentalobe Screws: passo 1, immagine 1 di 1

Before you begin, discharge your iPhone battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.
Power off your iPhone before beginning disassembly.
Remove the two 6.9 mm-long pentalobe screws at the bottom edge of the iPhone.
Opening the iPhone's display will compromise its waterproof seals. Have replacement seals ready before you proceed past this step, or take care to avoid liquid exposure if you reassemble your iPhone without replacing the seals.

Traduci

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 14 persone hanno completato questa guida.

Autore

con 1 altro collaboratore

Jeff Suovanen

Membro da: 08/06/13

427.796 Reputazione

259 Guide realizzate

Distintivi: 48

+45 altri distintivi

Team

iFixit Membro di iFixit

Staff

135 Membri

16.718 Guide realizzate

2 Commenti

So you have not explained wether or not the iphone XS and the iphone X have identical pentalobe screws, what a guide it is, well infact i found out the hard way they are identical and replaceable with iphone x housing pentalobe screws, thanks.

Jonez K - 18 mag 2019 Replica

On the screws what is the black stuff at the end of the screws? Because it came off my screws now I’m concerned that I have compromised the waterproof ness of my phone

Casey Hunter - 5 lug 2019 Replica