Salta al contenuto principale

iPhone X Disassembly

Cosa ti serve

Panoramica Video

  1. iPhone X Disassembly, Turn off the phone and remove SIM Card: passo 1, immagine 1 di 2 iPhone X Disassembly, Turn off the phone and remove SIM Card: passo 1, immagine 2 di 2
    • Press the wake button and volume down button to turn off the phone.

  2. iPhone X Disassembly, Open the phone: passo 2, immagine 1 di 3 iPhone X Disassembly, Open the phone: passo 2, immagine 2 di 3 iPhone X Disassembly, Open the phone: passo 2, immagine 3 di 3
    • Use the Pentaloble screwdriver to remove the charging port screws. Heating the phone with a heat gun will the phone easily to be opened.

  3. iPhone X Disassembly, Remove the iPhone X OLED screen: passo 3, immagine 1 di 3 iPhone X Disassembly, Remove the iPhone X OLED screen: passo 3, immagine 2 di 3 iPhone X Disassembly, Remove the iPhone X OLED screen: passo 3, immagine 3 di 3
    • Undo 5 screws shown in the picture below with a triangle screwdriver

    • Release the battery/LCD screen/digitizer/ear speaker connectors with a spudger.

  4. iPhone X Disassembly, Remove the ear speaker: passo 4, immagine 1 di 2 iPhone X Disassembly, Remove the ear speaker: passo 4, immagine 2 di 2
    • Undo 3 screws and heating the flex cable with a heat gun, we can remove the ear speaker easily

  5. iPhone X Disassembly, Remove rear-facing cameras.: passo 5, immagine 1 di 1
    • Remove 2 screws and remove the metal plate, release the rear cameras connectors.

  6. iPhone X Disassembly, Remove motherboard.: passo 6, immagine 1 di 2 iPhone X Disassembly, Remove motherboard.: passo 6, immagine 2 di 2
    • Release all connectors on the motherboard with a spudger

    • Undo 3 screws on the mother board then we can take out the mother board.

  7. iPhone X Disassembly, Remove Loudspeaker and Taptic engine: passo 7, immagine 1 di 3 iPhone X Disassembly, Remove Loudspeaker and Taptic engine: passo 7, immagine 2 di 3 iPhone X Disassembly, Remove Loudspeaker and Taptic engine: passo 7, immagine 3 di 3
    • Undo 8 screws on the retaining plate then remove the plate taking care to not break the small connector on the plate that connects just under the taptic engine

    • Remove the loud speaker and the taptic engine.

  8. iPhone X Disassembly, Remove battery: passo 8, immagine 1 di 2 iPhone X Disassembly, Remove battery: passo 8, immagine 2 di 2
    • Pulling out 4 battery adhesives with a tweezers then we can remove the battery.

  9. iPhone X Disassembly, Remove front-facing camera: passo 9, immagine 1 di 2 iPhone X Disassembly, Remove front-facing camera: passo 9, immagine 2 di 2
    • Heating the front facing camera with a heat gun will make it easily to be removed

  10. iPhone X Disassembly, Remove the charging port and antenna: passo 10, immagine 1 di 3 iPhone X Disassembly, Remove the charging port and antenna: passo 10, immagine 2 di 3 iPhone X Disassembly, Remove the charging port and antenna: passo 10, immagine 3 di 3
    • Release 4 screws on the frame shown in the picture

    • Heating the charging port flex cable then we can remove it easily

  11. iPhone X Disassembly, Remove Wi-Fi antenna: passo 11, immagine 1 di 3 iPhone X Disassembly, Remove Wi-Fi antenna: passo 11, immagine 2 di 3 iPhone X Disassembly, Remove Wi-Fi antenna: passo 11, immagine 3 di 3
    • Release 7 screws on the Wi-Fi flex cable

    • Heating the flex cable with a heat gun make it easier to be removed

  12. iPhone X Disassembly, Remove power button flex cable: passo 12, immagine 1 di 3 iPhone X Disassembly, Remove power button flex cable: passo 12, immagine 2 di 3 iPhone X Disassembly, Remove power button flex cable: passo 12, immagine 3 di 3
    • Release 3 screws on the power button

    • Heating the flex cable with a heat gun then it can be removed easily

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 128 persone hanno completato questa guida.

Mandy

Membro da: 12/05/14

9.518 Reputazione

9 Guide realizzate

25 Commenti

excellent guide!!!

Andy Lee - Replica

The iPhone X assemble video: https://youtu.be/E5jyuxgpE_g

Mandy - Replica

What About the backside ? I heard that when the backside is shattered, it’s almost impossible to repair, because of the glue that holds the backside and parts together ?

Arnoud - Replica

Hi avdk, we don’t tear down the back glass but we will pay attention to this question. If there is a definite answer, I will reply to you .Thank you.

Mandy -

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 44

Ultimi 7 Giorni: 295

Ultimi 30 Giorni: 1,162

Tutti i Tempi: 207,477