Salta al contenuto principale

iPhone 7 Plus Pentalobe Screws Replacement

Cosa ti serve

  1. iPhone 7 Plus Pentalobe Screws Replacement, Pentalobe Screws: passo 1, immagine 1 di 1
    • Before you begin, discharge your iPhone battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.

    • Power off your iPhone before beginning disassembly.

    • Remove the two 3.4 mm pentalobe screws at the bottom edge of the iPhone.

    • Opening the iPhone's display will compromise its waterproof seals. Have replacement seals ready before you proceed past this step, or take care to avoid liquid exposure if you reassemble your iPhone without replacing the seals.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 33 persone hanno completato questa guida.

Evan Noronha

Membro da: 02/05/15

223.223 Reputazione

168 Guide realizzate

4 Commenti

Can anyone confirm 7/7P's pentalobe screws have a ring of seal near the screw head?

Cooper Chase - Replica

Hey Cooper,

There is no seal on the screw. The head of the screw simply pushes against the lip of the screw well, without using any sort of pneumatic seal, o-ring etc.

As Talon says, it is part of the casing.

Harry Rowse -

I not recall seeing one. If there is one I would expect it to be part of the casing.

Talon - Replica

as the costumer said, there is a sealant but not noticeable

Mark Perick Quemado - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 12

Ultimi 30 Giorni: 61

Tutti i Tempi: 19,874