Salta al contenuto principale

iPhone 7 Battery Disconnection

Solo Prerequisita
Questa guida è destinata a essere usata solo come prerequisito per altre guide. Da sola è incompleta.

Cosa ti serve

  1. iPhone 7 Battery Disconnection, Battery Disconnection: passo 1, immagine 1 di 1
    Attrezzo utilizzato in questo passaggio:
    Magnetic Project Mat
    $19.95
    Compra
    • Remove four tri-point Y000 screws securing the lower connector bracket, of the following lengths:

    • Three 1.2 mm screws

    • One 2.4 mm screw

    • Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from to avoid damaging your iPhone.

  2. iPhone 7 Battery Disconnection: passo 2, immagine 1 di 1
    • Remove the lower connector bracket.

  3. iPhone 7 Battery Disconnection: passo 3, immagine 1 di 3 iPhone 7 Battery Disconnection: passo 3, immagine 2 di 3 iPhone 7 Battery Disconnection: passo 3, immagine 3 di 3
    • Use the point of a spudger to lift the battery connector out of its socket on the logic board.

    • Bend the connector cable up slightly to prevent it from making contact with the socket and providing power to the phone.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Evan Noronha

Membro da: 02/05/15

223.472 Reputazione

168 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 861