Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Introduzione

Prerequisite guide for disconnecting the battery connector.

    • Remove four tri-point Y000 screws securing the lower connector bracket, of the following lengths:

    • Three 1.2 mm screws

    • One 2.4 mm screw

    • Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from to avoid damaging your iPhone.

  1. Remove the lower connector bracket.
    • Remove the lower connector bracket.

  2. Use the point of a spudger to lift the battery connector out of its socket on the logic board. Bend the connector cable up slightly to prevent it from making contact with the socket and providing power to  the phone. Bend the connector cable up slightly to prevent it from making contact with the socket and providing power to  the phone.
    • Use the point of a spudger to lift the battery connector out of its socket on the logic board.

    • Bend the connector cable up slightly to prevent it from making contact with the socket and providing power to the phone.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Evan Noronha

Membro da: 05/02/2015

205.544 Reputazione

178 Guide realizzate

Team

iFixit Membro di iFixit

Community

134 Membri

15.647 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 3

Tutti i Tempi: 746