Salta al contenuto principale

iPhone 6 Plus Rear Facing Camera Replacement

Solo Prerequisita
Questa guida è destinata a essere usata solo come prerequisito per altre guide. Da sola è incompleta.

Cosa ti serve

  1. iPhone 6 Plus Rear Facing Camera Replacement, Rear Facing Camera: passo 1, immagine 1 di 1
    • Remove the following screws securing the rear-facing camera bracket to the rear case:

    • One 1.7 mm Phillips #00 screw

    • One 2.3 mm Phillips #00 screw

  2. iPhone 6 Plus Rear Facing Camera Replacement: passo 2, immagine 1 di 1
    • Lift and remove the rear-facing camera bracket out of the iPhone.

  3. iPhone 6 Plus Rear Facing Camera Replacement: passo 3, immagine 1 di 1
    • Use the flat end of a spudger to disconnect the rear-facing camera connector from its socket on the logic board.

  4. iPhone 6 Plus Rear Facing Camera Replacement: passo 4, immagine 1 di 1
    • Carefully lift and remove the rear-facing camera out of the iPhone.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 517