Salta al contenuto principale

Ricambi

Nessuna parte specificata.

  1. Remove three screws securing the vibrator and vibrator bracket to the rear case: One 2.3 mm Phillips screw
    • Remove three screws securing the vibrator and vibrator bracket to the rear case:

    • One 2.3 mm Phillips screw

    • One 1.7 mm Phillips screw

    • One 1.6 mm Phillips screw securing the vibrator to the top inside of the rear case.

  2. Remove the vibrator and vibrator bracket from the rear case.
    • Remove the vibrator and vibrator bracket from the rear case.

  3. Remove the following screws securing the volume button and ringer switch brackets to the side of the rear case:
    • Remove the following screws securing the volume button and ringer switch brackets to the side of the rear case:

    • One 1.5 mm Phillips screw

    • Two 1.8 mm Phillips screws

  4. Use the tip of a spudger to pry the ringer switch bracket from the side of the rear case. Remove the ringer switch.
    • Use the tip of a spudger to pry the ringer switch bracket from the side of the rear case.

    • Remove the ringer switch.

  5. Use a spudger to pry the volume button bracket from the side of the rear case. Remove the volume buttons.
    • Use a spudger to pry the volume button bracket from the side of the rear case.

    • Remove the volume buttons.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Team

iFixit Membro di iFixit

Community

138 Membri

16.993 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 476