Aggiusta la tua roba Comunità Store

iPhone 4S Speaker Enclosure Assembly Replacement

Solo Prerequisita
Questa guida è destinata a essere usata solo come prerequisito per altre guide. Da sola è incompleta.

Introduzione

Prereq when logic board is removed.

Cosa ti serve

  1. iPhone 4S Speaker Enclosure Assembly Replacement, Speaker Enclosure Assembly: passo 1, immagine 1 di 1

    • Remove the two 2.4 mm Phillips screws from the sides of the speaker enclosure assembly.

    Traduci

  3. iPhone 4S Speaker Enclosure Assembly Replacement: passo 2, immagine 1 di 1

    • Remove the small plastic bracket that was installed under the screw closest to the dock connector cable.

    Traduci

  4. iPhone 4S Speaker Enclosure Assembly Replacement: passo 3, immagine 1 di 2 iPhone 4S Speaker Enclosure Assembly Replacement: passo 3, immagine 2 di 2

    • Remove the speaker enclosure assembly from the iPhone.

    • Before reinstalling the speaker enclosure assembly's screws, be sure the Wi-Fi grounding fingers are installed below the lip in the iPhone's metal case as seen in the second picture.

    • Before reassembly, be sure to clean all metal-to-metal contact points between the grounding fingers of the Wi-Fi antenna and the case of the iPhone with a de-greaser such as windex or isopropyl alcohol. The oils on your fingers have the potential to cause wireless interference issues.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 3 persone hanno completato questa guida.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 1,499