Salta al contenuto principale

iPad mini 4 LTE Display Assembly Replacement

Solo Prerequisita
Questa guida è destinata a essere usata solo come prerequisito per altre guide. Da sola è incompleta.

Cosa ti serve

  1. iPad mini 4 LTE Display Assembly Replacement, Display Assembly: passo 1, immagine 1 di 3 iPad mini 4 LTE Display Assembly Replacement, Display Assembly: passo 1, immagine 2 di 3 iPad mini 4 LTE Display Assembly Replacement, Display Assembly: passo 1, immagine 3 di 3
    • Use the pointed end of a spudger to disconnect the display data connector from its socket on the logic board.

    • Use the pointed end of a spudger to disconnect the digitizer cable connector from its socket on the logic board.

    • When reconnecting these, press down from one end of the connector to the other. If you press in the middle of the connector, you may bend it, causing damage or a poor connection.

  2. iPad mini 4 LTE Display Assembly Replacement: passo 2, immagine 1 di 1
    • Remove the display assembly.

    • To reinstall your display assembly, you will need to replace the display adhesive. Use our display adhesive application guide to reapply your display adhesive and reseal your device.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Evan Noronha

Membro da: 02/05/15

223.223 Reputazione

168 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 292