Salta al contenuto principale

Introduzione

prereq only guide for replacing a screen and digitizer, or home button.

  1. Use the pointed end of a spudger to disconnect the display data connector from its socket on the logic board. Use the pointed end of a spudger to disconnect the digitizer cable connector from its socket on the logic board. When reconnecting these, press down from one end of the connector to the other. If you press in the middle of the connector, you may bend it, causing damage or a poor connection.
    • Use the pointed end of a spudger to disconnect the display data connector from its socket on the logic board.

    • Use the pointed end of a spudger to disconnect the digitizer cable connector from its socket on the logic board.

    • When reconnecting these, press down from one end of the connector to the other. If you press in the middle of the connector, you may bend it, causing damage or a poor connection.

  2. Remove the display assembly.
    • Remove the display assembly.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Evan Noronha

Membro da: 05/02/2015

179.353 Reputazione

177 Guide realizzate

Team

iFixit Membro di iFixit

Community

107 Membri

9.557 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 81