Salta al contenuto principale

Introduzione

Prerequisite only guide for removing the front panel assembly from an iPad Mini 3.

Parti

Nessuna parte specificata.

  1. Use the tip of a spudger to lift the digitizer cable connector straight up off of its socket. Use the tip of a spudger to lift the digitizer cable connector straight up off of its socket.
    • Use the tip of a spudger to lift the digitizer cable connector straight up off of its socket.

  2. Slide the flat end of a spudger under the battery side of the digitizer board to begin separating it from the rear case. Slide the flat end of a spudger under the battery side of the digitizer board to begin separating it from the rear case.
    • Slide the flat end of a spudger under the battery side of the digitizer board to begin separating it from the rear case.

  3. Batterie per PC portatili

    Una soluzione semplice per un grande aumento di potenza.

    Acquista ora

    Batterie per PC portatili

    Una soluzione semplice per un grande aumento di potenza.

    Acquista ora
  4. Lift the digitizer board up to free the last of the adhesive. Lift the digitizer board up to free the last of the adhesive.
    • Lift the digitizer board up to free the last of the adhesive.

  5. Lift and remove the front panel assembly from the iPad.
    • Lift and remove the front panel assembly from the iPad.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Evan Noronha

Membro da: 05/02/2015

171.669 Reputazione

177 Guide realizzate

Team

iFixit Membro di iFixit

Community

99 Membri

9.305 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 1

Tutti i Tempi: 153