Introduzione

This guide covers the disassembly of the iON SnapCam 1045 battery.

Parti

Nessuna parte richiesta.

  1. Detach the magnetic  clip from the bottom  of the camera.
    • Detach the magnetic clip from the bottom of the camera.

    • The magnetic clip gets in the way of disassembly because it constantly spins and therefore a distraction so it is imperative to detach.

  2. Use a spudger to  gently detach  the  memory card and USB slot cover.
    • Use a spudger to gently detach the memory card and USB slot cover.

  3. Spedizione gratuita per tutti gli ordini superiori a 100 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio
  4. Use a Phillips #000 Screwdriver to  loosen the 0.008 mm screw  located between the USB and memory card slots.
    • Use a Phillips #000 Screwdriver to loosen the 0.008 mm screw located between the USB and memory card slots.

    • This screw is really tiny and can easily fall off and get lost! Make use of a magnetic mat to hold it in place or better still put the magnetic clip to use for keeping the screw safe.

  5. Once again use the spudger to gently open the encasement. The case is a little fragile and forceful entry could lead to damage of the plastic case. Thread carefully.
    • Once again use the spudger to gently open the encasement.

    • The case is a little fragile and forceful entry could lead to damage of the plastic case. Thread carefully.

    • The Battery can be safely detached and replaced.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Olakunle

Membro da: 11/11/2017

102 Reputazione

1 Guida realizzata

Team

IUPUI, Team S3-G3, Wilson Fall 2017 Membro di IUPUI, Team S3-G3, Wilson Fall 2017

IUPUI-WILSON-F17S3G3

3 Membri

3 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 8

Tutti i Tempi: 171