Salta al contenuto principale

iMac Intel 27" EMC 2546 Fan Replacement

Solo Prerequisita
Questa guida è destinata a essere usata solo come prerequisito per altre guide. Da sola è incompleta.

Cosa ti serve

  1. iMac Intel 27" EMC 2546 Fan Replacement, Remove the fan: passo 1, immagine 1 di 3 iMac Intel 27" EMC 2546 Fan Replacement, Remove the fan: passo 1, immagine 2 di 3 iMac Intel 27" EMC 2546 Fan Replacement, Remove the fan: passo 1, immagine 3 di 3
    • Use the tip of a spudger to disconnect the fan cable's connector from its socket on the logic board.

  2. iMac Intel 27" EMC 2546 Fan Replacement: passo 2, immagine 1 di 2 iMac Intel 27" EMC 2546 Fan Replacement: passo 2, immagine 2 di 2
    • Peel the black tape connecting the fan to the exhaust duct back slightly.

    • Leave the tape in place on the exhaust duct—you only need to expose the joint to free the fan.

  3. iMac Intel 27" EMC 2546 Fan Replacement: passo 3, immagine 1 di 1
    • Remove three 12.4 mm T10 screws securing the fan to the rear case.

  4. iMac Intel 27" EMC 2546 Fan Replacement: passo 4, immagine 1 di 2 iMac Intel 27" EMC 2546 Fan Replacement: passo 4, immagine 2 di 2
    • Remove the fan from the iMac.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Team

iFixit Membro di iFixit

Staff

136 Membri

16.579 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 292