iMac Intel 21.5" Retina 4K Display 2019 Lower Support Bracket Replacement

Introduzione

Prereq-only guide for removing the lower support bracket in an iMac 4K 2019.

Remove the following five Phillips screws holding the lower support bracket in place:
Four 3.2 mm screws
One 1.7 mm screw
You may need to peel up the display adhesive lining the bottom edge of the iMac enclosure to access the screws.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Membro da: 04/11/15

196.194 Reputazione

416 Guide realizzate