Aggiusta la tua roba

Diritto alla Riparazione

Store

iMac Intel 21.5" Retina 4K Display (2017) Display Assembly Replacement

Scritto Da: Adam O'Camb
  • Commenti: 2
  • Preferiti: 0

Difficoltà

Moderato

Passi

3

Tempo Necessario

Suggerisci un tempo??

Sezioni

1

Contrassegni

1

Prerequisite Only

Solo Prerequisita

Per favore tieni conto che questa guida è solo un prerequisito per altre guide.

Introduzione

Prereq-only guide to remove the entire display assembly.

  1. Lift the display up to a near-vertical position. At this point there is still a strip of adhesive along the bottom of the display that will hold the display to the frame like a hinge. You can loosen this adhesive by working the display up and down a few times.

    • Lift the display up to a near-vertical position.

    • At this point there is still a strip of adhesive along the bottom of the display that will hold the display to the frame like a hinge. You can loosen this adhesive by working the display up and down a few times.

    Traduci

  2. The Essential Toolkit

    The most helpful tools in our most compact kit.

    Acquista ora

    The Essential Toolkit

    The most helpful tools in our most compact kit.

    Acquista ora

  3. If necessary, a plastic card can be used to cut any remaining sections of the bottom adhesive strip. If necessary, a plastic card can be used to cut any remaining sections of the bottom adhesive strip.

    • If necessary, a plastic card can be used to cut any remaining sections of the bottom adhesive strip.

    Traduci

  4. Lift the display up from the frame and remove it from the iMac. It may be necessary to slowly lift from one side to peel against the remaining adhesive. Be very careful handling the display—it's big, heavy, and made of glass.

    • Lift the display up from the frame and remove it from the iMac.

    • It may be necessary to slowly lift from one side to peel against the remaining adhesive.

    • Be very careful handling the display—it's big, heavy, and made of glass.

    • After the adhesive is cut, it cannot be used to re-seal the display in place. Follow this guide to replace the adhesive strips that secure the display to the rear enclosure.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

Adam O'Camb

Membro da: 11/04/2015

112.768 Reputazione

325 Guide realizzate

Distintivi: 39

+36 altri distintivi

Team

iFixit Membro di iFixit

Community

132 Membri

13.497 Guide realizzate

0 Commenti

Aggiungi un commento

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 6

Tutti i Tempi: 104