Salta al contenuto principale

iMac Intel 21.5" EMC 2428 Optical Drive Replacement

Solo Prerequisita
Questa guida è destinata a essere usata solo come prerequisito per altre guide. Da sola è incompleta.

Cosa ti serve

  1. iMac Intel 21.5" EMC 2428 Optical Drive Replacement, Optical Drive: passo 1, immagine 1 di 1
    • From here, the repair will be easier if you flip the computer around so the base is facing you.

    • Remove the following four screws:

    • One 9.3 mm T10 Torx screw with a large head

    • Three 9.3 mm T10 Torx screws with a normal sized head

  2. iMac Intel 21.5" EMC 2428 Optical Drive Replacement: passo 2, immagine 1 di 2 iMac Intel 21.5" EMC 2428 Optical Drive Replacement: passo 2, immagine 2 di 2
    • Pull the optical drive thermal sensor connector straight up from its socket on the logic board. Pull parallel to the board.

  3. iMac Intel 21.5" EMC 2428 Optical Drive Replacement: passo 3, immagine 1 di 2 iMac Intel 21.5" EMC 2428 Optical Drive Replacement: passo 3, immagine 2 di 2
    • Lift the inner edge of the optical drive and maneuver its connector past the GPU frame attached to the logic board.

    • Carefully pull the optical drive off its mounting pins on the right side of the outer case to gain clearance for disconnecting the optical drive cable.

    • Allow the optical drive to hang down as you de-route the optical drive thermal sensor connector from behind the GPU heat sink.

  4. iMac Intel 21.5" EMC 2428 Optical Drive Replacement: passo 4, immagine 1 di 1
    • Disconnect the optical drive cable by pulling its connector away from the optical drive.

    • Remove the optical drive from the iMac.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 296