Aggiusta la tua roba Comunità Store

iMac Intel 21.5" EMC 2308 RAM Replacement

Introduzione

Upgrade your RAM for an instant increase in speed.

Cosa ti serve

  1. iMac Intel 21.5" EMC 2308 RAM Replacement, Access Door: passo 1, immagine 1 di 2 iMac Intel 21.5" EMC 2308 RAM Replacement, Access Door: passo 1, immagine 2 di 2

    • Loosen the three Phillips screws securing the access door to the bottom edge of your iMac.

    • These screws will remain captive in the access door.

    • Remove the access door from your iMac.

    • During reassembly, fasten the access door loosely and align it with the pocket cut into the outer case of the iMac before fully tightening the screws.

    Traduci

  3. iMac Intel 21.5" EMC 2308 RAM Replacement, RAM: passo 2, immagine 1 di 1

    • Use the sharp tip of a spudger to pull the black plastic RAM tabs out of the memory bay.

    Traduci

  4. iMac Intel 21.5" EMC 2308 RAM Replacement: passo 3, immagine 1 di 2 iMac Intel 21.5" EMC 2308 RAM Replacement: passo 3, immagine 2 di 2

    • Pull the black plastic RAM tab away from your iMac to eject the RAM chip.

    • Grab the RAM chip by its edges and pull it straight out of its slot.

    • If two RAM chips are installed, repeat this process for the other chip.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 111 persone hanno completato questa guida.

Un commento

There needs to be a little bit of important discucssion about getting the new RAM properly seated into the slots. Otherwise, great instructions!

Mary - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 12

Ultimi 30 Giorni: 99

Tutti i Tempi: 88,755