Salta al contenuto principale

iMac Intel 21.5" EMC 2308 Optical Drive Replacement

Solo Prerequisita
Questa guida è destinata a essere usata solo come prerequisito per altre guide. Da sola è incompleta.

Cosa ti serve

  1. iMac Intel 21.5" EMC 2308 Optical Drive Replacement, Optical Drive: passo 1, immagine 1 di 1
    • Pull the optical drive thermal sensor connector straight away from its socket on the logic board.

  2. iMac Intel 21.5" EMC 2308 Optical Drive Replacement: passo 2, immagine 1 di 1
    • Remove the four 9 mm T10 Torx screws securing the optical drive to the outer case.

  3. iMac Intel 21.5" EMC 2308 Optical Drive Replacement: passo 3, immagine 1 di 1
    • Lift the inner edge of the optical drive and maneuver its connector past the frame attached to the logic board.

    • Carefully pull the optical drive off its mounting pins on the edge of the outer case to gain clearance for disconnecting the optical drive cable.

  4. iMac Intel 21.5" EMC 2308 Optical Drive Replacement: passo 4, immagine 1 di 1
    • Use the flat end of a spudger to help disconnect the optical drive cable.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 1,653