Salta al contenuto principale

iMac Intel 20" EMC 2266 RAM Replacement

Cosa ti serve

  1. iMac Intel 20" EMC 2266 RAM Replacement, Access Door: passo 1, immagine 1 di 1
    • Lay your iMac front side down on a table with the lower edge facing yourself.

    • Loosen the single Phillips screw in the center of the access door.

    • This screw is captive in the access door.

    • Remove the access door from your iMac.

  2. iMac Intel 20" EMC 2266 RAM Replacement, RAM: passo 2, immagine 1 di 2 iMac Intel 20" EMC 2266 RAM Replacement, RAM: passo 2, immagine 2 di 2
    • Use the sharp end of a spudger to pull the black plastic RAM tabs out of the memory bay.

    • Pull the black plastic RAM tab away from your iMac to eject the RAM chip.

  3. iMac Intel 20" EMC 2266 RAM Replacement: passo 3, immagine 1 di 1
    • Grab the RAM chip by its edges and pull it straight out of its slot.

    • If two RAM chips are installed, repeat this process for the other chip.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 91 persone hanno completato questa guida.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 23

Tutti i Tempi: 37,617