Cosa ti serve
-
-
iMac G3. Questo fu un gran computer per la sua epoca, con un sacco di funzionalità interessanti.
-
-
-
Rimuovi questa vite a croce Phillips.
-
Usando un cacciavite a testa piatta, cerca di separare la cover del fondo partendo dalla punta finché non si sgancia.
-
Dopodiché, procedi ai lati seguendo la linea di contrasto tra la plastica colorata e trasparente. Rimuovi la cover spostandola verso l'alto e inclinandola un po' all'opposto della plastica colorata.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
To remove the bottom cover, remove these phillips screws, and pull the bottom cover off the iMac. (Start with the very back and use a flat head screwdriver to pop the main clip. The rest will come off relatively easily.)
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Removing the faceplate:
-
Remove these phillips screws.
-
Now, pivot the faceplate up about 60 degrees and pull it away from the imac, with some wiggleing, it should come free
-