Aggiusta la tua roba Comunità Store

iHome iP1 Back Cover Replacement

Introduzione

Use this guide to remove your iHome iP1's back cover. This cover is located on the underside of the platorm connecting the speakers. Although it serves no function other than to protect the motherboard, it is necessary to remove in order to remove many other components of the iHome iP1, such as the speakers and the 30-pin connector.

Cosa ti serve

  1. iHome iP1 Back Cover Replacement, Back Cover: passo 1, immagine 1 di 1

    • Orient the iHome upside down with the speakers facing away from you.

    Modifica

  3. iHome iP1 Back Cover Replacement: passo 2, immagine 1 di 2 iHome iP1 Back Cover Replacement: passo 2, immagine 2 di 2

    • Remove the four 9.5 mm Phillips #2 screws located on each of the four corners of the iHome's back cover.

    Modifica

  4. iHome iP1 Back Cover Replacement: passo 3, immagine 1 di 1

    • Remove the back cover by grabbing its sides and lifting it off the iHome.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 2 altri collaboratori

Wen Sullivan

Membro da: 10/06/16

518 Reputazione

4 Guide realizzate

Distintivi: 10

+7 altri distintivi

Team

Cal Poly, Team 20-1, Livingston Fall 2016 Membro di Cal Poly, Team 20-1, Livingston Fall 2016

CPSU-LIVINGSTON-F16S20G1

4 Membri

7 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 10

Tutti i Tempi: 218