Aggiusta la tua roba Comunità Store

iHome iAVS16 Power Board Replacement

Introduzione

This guide shows how to open the bottom of the iHome iAVS16 to gain access to the board housing the AC power and USB jacks.

Since the iHome iAVS16 is a compact device, any following replacement guide will use this guide as well in order to access the rest of the device.

Cosa ti serve

  1. iHome iAVS16 Power Board Replacement, Power Board: passo 1, immagine 1 di 3 iHome iAVS16 Power Board Replacement, Power Board: passo 1, immagine 2 di 3 iHome iAVS16 Power Board Replacement, Power Board: passo 1, immagine 3 di 3

    • Remove the four 1.7 mm Phillips #0 screws located on the bottom of the device.

    • Lift up the bottom of the device.

    • Carefully lift the bottom of the device up as to not damage the ribbon cable connecting it.

    Modifica

  2. iHome iAVS16 Power Board Replacement: passo 2, immagine 1 di 3 iHome iAVS16 Power Board Replacement: passo 2, immagine 2 di 3 iHome iAVS16 Power Board Replacement: passo 2, immagine 3 di 3

    • Remove the two 1.7 mm Phillips #0 screws holding the white face place onto the inside of the device's bottom.

    • Using an iFixit opening tool on the side without the black adhesive, carefully lift up the white face plate.

    • Lifting too quickly could damage the ribbon cable still attached.

    Modifica

  4. iHome iAVS16 Power Board Replacement: passo 3, immagine 1 di 2 iHome iAVS16 Power Board Replacement: passo 3, immagine 2 di 2

    • Using the tweezers, lift up on the black tab holding the ribbon cable down.

    • Carefully pull the ribbon cable back and out of the slot.

    Modifica

  5. iHome iAVS16 Power Board Replacement: passo 4, immagine 1 di 3 iHome iAVS16 Power Board Replacement: passo 4, immagine 2 di 3 iHome iAVS16 Power Board Replacement: passo 4, immagine 3 di 3

    • Remove the two 1.7 mm Phillips #0 screws holding the power board in.

    • Carefully flip the board over.

    • Remove the red connector from its socket with a pair of tweezers.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 107