Salta al contenuto principale

iDea USA CT702 Microphone Replacement

Cosa ti serve

  1. iDea USA CT702 Microphone Replacement, Microphone: passo 1, immagine 1 di 1
    • Place the tablet face up with portholes facing you.

  2. iDea USA CT702 Microphone Replacement: passo 2, immagine 1 di 2 iDea USA CT702 Microphone Replacement: passo 2, immagine 2 di 2
    • Use a fingernail, or a plastic opening tool to gently pry the black panel around the portholes.

    • Be gentle and take your time. Excessive force could damage the device.

  3. iDea USA CT702 Microphone Replacement: passo 3, immagine 1 di 3 iDea USA CT702 Microphone Replacement: passo 3, immagine 2 di 3 iDea USA CT702 Microphone Replacement: passo 3, immagine 3 di 3
    • Use your fingers to pry the rest of the back off; slowly apply pressure from each side to break each clip connection.

  4. iDea USA CT702 Microphone Replacement: passo 4, immagine 1 di 1
    • Once the back is off, position the tablet as shown and be sure to warm your soldering iron.

  5. iDea USA CT702 Microphone Replacement: passo 5, immagine 1 di 1
    • Place tip of the soldering iron on the end of the wire to break connection.

    • Remember to use proper safety precautions when soldering.

  6. iDea USA CT702 Microphone Replacement: passo 6, immagine 1 di 1
    • Grip the new microphone with tweezers and place in the slot.

    • Solder the new connections while using tweezers to hold the speaker steady.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Benton Gray

Membro da: 03/11/15

201 Reputazione

2 Guide realizzate

Team

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 110