Introduzione

For this repair guide, the rear facing camera on the iDea USA CT 1020 will be addressed. The camera can easily become damaged or cracked if the tablet is mishandled by the user, or the camera can simply stop working. Once the backing plate is removed from the tablet and the rear camera is located on the motherboard, the removal process is simple. The electrical ribbon running from the camera goes to an electrical connector, and once the connector is unsnapped, the camera is free to be removed.

First, power down the tablet to avoid the chance of electrical shock or damaging the machine during repair work
  • First, power down the tablet to avoid the chance of electrical shock or damaging the machine during repair work

  • Place the tablet on a clean surface with the screen down

Aggiungi Commento

Remove the back plastic casing of the tablet by releasing the plastic clips with a plastic opening tool or a spudger.
  • Remove the back plastic casing of the tablet by releasing the plastic clips with a plastic opening tool or a spudger.

    • Be cautious and take your time here; the plastic clips are quite fragile.

Aggiungi Commento

  • Use a plastic opening tool or spudger to lift and release the camera assembly ZIF tab.

  • Gently pull the ribbon cable free.

Aggiungi Commento

  • The camera is held in place by adhesive material on the back of the camera

  • To complete removal, peel the camera off the mother board

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

David Lawrence

Membro da: 22/01/2018

109 Reputazione

1 Guida realizzata

Team

IUPUI, Team S1-G3, Freund Spring 2018 Membro di IUPUI, Team S1-G3, Freund Spring 2018

IUPUI-FREUND-S18S1G3

3 Membri

2 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 42