Salta al contenuto principale
Unisciti alla Community delle riparazioni - Crea un account

Questo smontaggio non è una guida di riparazione. Per riparare il tuo iClicker, usa il nostro manuale di assistenza.

  1. iClicker Teardown, iClicker Teardown: passo 1, immagine 1 di 1
    • Remove the battery cover

    Chiedi a FixBot
  2. iClicker Teardown: passo 2, immagine 1 di 2 iClicker Teardown: passo 2, immagine 2 di 2
    • Remove the two AAA batteries

    Chiedi a FixBot
  3. iClicker Teardown: passo 3, immagine 1 di 3 iClicker Teardown: passo 3, immagine 2 di 3 iClicker Teardown: passo 3, immagine 3 di 3
    • Remove the three screws using a screwdriver

    Chiedi a FixBot
  4. iClicker Teardown: passo 4, immagine 1 di 2 iClicker Teardown: passo 4, immagine 2 di 2
    • Remove the back cover

    Chiedi a FixBot
  5. iClicker Teardown: passo 5, immagine 1 di 2 iClicker Teardown: passo 5, immagine 2 di 2
    • Remove the positive and negative battery contacts using pliers

    Chiedi a FixBot
  6. iClicker Teardown: passo 6, immagine 1 di 1
    • Remove the circuit board

    Chiedi a FixBot
  7. iClicker Teardown: passo 7, immagine 1 di 1
    • Remove the soft touch buttons

    Chiedi a FixBot
  8. iClicker Teardown: passo 8, immagine 1 di 2 iClicker Teardown: passo 8, immagine 2 di 2
    • Full IC Identification:

    • Predicted Block Diagram is on the 2nd image.

    • You may need to enlarge it to view the text.

    Chiedi a FixBot
  9. iClicker Teardown: passo 9, immagine 1 di 1
    • You're done!

    Chiedi a FixBot

Team

Cal Poly, Team 9-4, Banghart Winter 2017 Membro di Cal Poly, Team 9-4, Banghart Winter 2017

CPSU-BANGHART-W17S9G4

4 Membri

11 guide realizzate

0Commenti sulla guida

Aggiungi Commento

Visualizza statistiche:

Ultime 24 ore: 1

Ultimi 7 giorni: 3

Ultimi 30 giorni: 39

Tutti i Tempi: 1,097