Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.
Introduzione
Tripped over your power cord? At least you don't have to replace the entire logic board.
Cosa ti serve
-
-
Use a pin (or anything you like) to remove the three rubber feet from the lower case.
-
-
-
-
Remove the following 10 screws from the bottom shield:
-
Six 3 mm Phillips
-
Three 7.5 mm Phillips
-
One 14 mm Phillips
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulla: non ho completato questa guida.
Altre 69 persone hanno completato questa guida.