Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.
Introduzione
Replace a faulty display inverter with the display attached to your iBook.
Cosa ti serve
-
-
Use a 1.5mm hex screwdriver to remove the two hex screws on either side of the display (four screws total).
-
-
-
-
Close the display.
-
Remove the small pieces of yellow tape securing the thin metal LCD cover to the display.
-
Remove the large piece of tape near the right display hinge.
-
-
-
Remove the pieces of tape holding the inverter and the inverter cables to the clutch hinges.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.