Introduzione

Replace or change the CD drive faceplate.

Use a coin to turn both battery locking screws 90 degrees to the left.
  • Use a coin to turn both battery locking screws 90 degrees to the left.

  • Remove the battery cover.

  • Remove the battery from the computer by pulling up on the plastic tab.

Aggiungi Commento

Use a straightened paperclip to manually eject the CD-ROM tray.
  • Use a straightened paperclip to manually eject the CD-ROM tray.

Aggiungi Commento

Remove the single black Phillips screw from the center of the CD-ROM bezel.
  • Remove the single black Phillips screw from the center of the CD-ROM bezel.

Aggiungi Commento

Grasp the CD-ROM bezel and rotate it upward to remove it from the drive.
  • Grasp the CD-ROM bezel and rotate it upward to remove it from the drive.

If you rotate the bezel upward as described- you SNAP OFF THE TAB THAT YOU REMOVED THE SCREW FROM, which is what ATTACHES the bezel to the drive!!!. THANKS!

quayd - Replica

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 4 persone hanno completato questa guida.

Documenti Allegati

iRobot

Membro da: 24/09/2009

1 Reputazione

774 Guide realizzate

There are two small black phillips screws which ALSO need to be removed ...... on some models. Although appearing identical, these covers are "similar" but NOT interchangeable between models of CD-Rom.

John Foster - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 14

Tutti i Tempi: 8,733