Modifiche al passo #6
Modifica di Brett Hartt —
Modifica approvata da Brett Hartt
- Prima di
- Dopo il
- Invariato
Righe Passo
| + | [* black] Fine tune the derailleur by tightening or loosening the barrel adjuster screw. Loosening this screw causes the derailleur to move slightly towards a larger sprocket, while tightening it moves the derailler towards a smaller sprocket. |
|---|---|
| + | [* black] Shift through each gear while pedaling. The derailleur should move the chain one gear over each time you shift up or down. |
| + | [* black] If the chain skips or makes noise when you are not shifting, use the barrel adjustment screw to fine tune the derailleur alignment. |
| + | [* black] Repeat the previous steps until the derailleur shifts smoothly and makes a minimal amount of noise. |
Immagine 1
Nessuna immagine precedente.
Aggiunto