Modifiche al passo #1
Modifica di Jeremiah Miskimen —
Modifica approvata da Jeremiah Miskimen
- Prima di
- Dopo il
- Invariato
Righe Passo
| - | [* black] First, you will need to remove all four screws located on the back of the device. This should be done using a Phillips #1 screw driver. |
|---|---|
| + | [* black] First, you will need to remove all four M2x1-7 screws (7mm length) located on the back of the device. This should be done using a Phillips #1 screw driver. |