Modifiche al passo #1
Modifica di Quinn Kennedy —
Modifica approvata da Quinn Kennedy
- Prima di
- Dopo il
- Invariato
Righe Passo
| - | [* black] Insert prying end of plasic opening tool into the seam between the screen and the front pannel. Work across top edge of screen assembly, corner to corner, prying the screen from the back pannel. |
|---|---|
| - | [* black] Repeat same process on the seams along both sides of screen assembly. |
| - | [* black] There should be several audible clicks as the screen separates from the from pannel. |
| - | [* black] fold the screen and front pannel appart, leaving them connected at the side closest to the keyboard |
| + | [* black] Use plastic opening tool to pry the front pannel away from the screen. First, work across top edge of screen assembly, corner to corner |
| + | [* black] Pry the front pannel away from the screen, leaving adajacent edges touching near the hinge of the laptop |
| + | [* icon_note] When separating the screen and front pannel, it may be helpful to leave an opening tool in the corners so they do not snap closed |