Salta al contenuto principale

Modifiche al passo #5

Modifica in base a Brett Hartt-

Modifica approvata da Brett Hartt

Eliminato
Aggiunto
Invariato

Righe Passo

[* icon_note] The display assembly is held in place by a large amount of adhesive on the underside of the large copper ESD shield. In the next few steps, you will be using a plastic spudger to release this adhesive.
[* icon_caution] Work carefully and slowly and make sure to not break the I/O data cable.

Immagine 1

Nessuna immagine precedente.

Aggiunto