Salta al contenuto principale

Modifiche al passo #1

Modifica in base a gerardfowley-

Modifica approvata da Jake Devincenzi

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Peel the upper piece of black adhesive tape completely up off the Nexus 7.
[* black] Similarly, peel the lower piece of black adhesive tape, but only as far as the copper strip.
[* icon_note] It is helpful to fold this piece of tape back on itself to keep it out of the way.
[* black] Watch for the metal shield lifting when pulling the tape. Hold it in place, or if it lifts re-seat it in the spring clips around the perimeter of the shielded area.