Salta al contenuto principale

Modifiche al passo #2

Modifica di Safe Mustafa

Modifica approvata da Safe Mustafa

Prima di
Dopo il
Invariato

Righe Passo

-[* black] After removing the back, the battery should be the largest black object towards the bottom right of the laptop. It is both the square block and the large rectangular. They look like separate things, but they are both the battery.
+[* icon_note] After removing the back, the battery should be the largest black object towards the bottom right of the laptop. It is both the square block and the large rectangular. They look like separate things, but they are both the battery.
[* black] Unscrew all the screws attaching the battery to the basis of the computer. There should be 5 screws in total: 2 on the top, 1 on the bottom, 1 on the right side, and 1 on the left side.
[* black] Disconnect the three chips attached to the battery. The chips have a head that can be disconnected by pulling away from the slot. If they seem hard to pull, try to wiggle them loose to make it easier to pull.
-[* black] Pull out the old battery after everything is disconnected and place the new one in.
-[* black] Repeat all the steps in reverse.
+[* black] Pull out the battery after everything is disconnected.