Salta al contenuto principale

Modifiche al passo #6

Modifica in base a Rudy Prieto-

Modifica approvata da Rudy Prieto

Prima di
Dopo il
Invariato

Righe Passo

[* black] Remove the two screws holding the assembly in place.
-[* black] 1 Phillips #J000 screw (4mm) on right side under copper tab.
-[* black] 1 Phillips #J000screw (4mm) on bottom left under battery tray.
+[* red] 1 Phillips #J000 screw (4mm) on right side under copper tab.
+[* red] 1 Phillips #J000screw (4mm) on bottom left under battery tray.