Salta al contenuto principale

Modifiche al passo #1

Modifica in base a Sahil Sharma-

Modifica approvata da Sahil Sharma

Prima di
Dopo il
Invariato

Righe Passo

[* red] Use a Phillips #EDIT#1 screwdriver to loosen the four (4) large silver screwsscrews evenly in the order of the numbers engraved next to each screw.
[* orange] Use a Phillips # 0 to removeloosen the other four (4) 2mm screws.
[* icon_note] The number
2mm screws evenly in the order engraved on the copper next to each screw corresponds to the order that you should remove them inscrew.
[* black] LoosenRepeat the last two bullets until all the larger silver screws 1-4,make a clicking sound and then removethe 2mm screws are removed.
[* icon_note] The silver
screws 5-8cannot be completely removed.
[* black] RemovePeel away the black electrical tape attached tobetween the RAM casingshield and the heat sink.
[* red] Use a Phillips #EDIT#1 screwdriver to loosen the four (4) large silver screwsscrews evenly in the order of the numbers engraved next to each screw.
[* orange] Use a Phillips # 0 to removeloosen the other four (4) 2mm screws.
[* icon_note] The number
2mm screws evenly in the order engraved on the copper next to each screw corresponds to the order that you should remove them inscrew.
[* black] LoosenRepeat the last two bullets until all the larger silver screws 1-4,make a clicking sound and then removethe 2mm screws are removed.
[* icon_note] The silver
screws 5-8cannot be completely removed.
[* black] RemovePeel away the black electrical tape attached tobetween the RAM casingshield and the heat sink.