Salta al contenuto principale

Modifiche al passo #3

Modifica in base a Sahil Sharma-

Modifica approvata da Sahil Sharma

Prima di
Dopo il
Invariato

Righe Passo

[* black] Place the computer on its back, facing up.
[* black] Wedge the plastic opening tool in between the screen and the bezel of the aluminum computer casing.
-[* black] Move the tool along the entire edge of the screen with an up-and-down prying motion to loosen the screen from the casing.
+[* black] Move the tool along the entire edge of the screen with an up-and-down prying motion to loosen the screen from the casing. Do not lift the entire screen away from the computer yet.
[* icon_note] The screen is held in place by plastic tabs. These will create a popping sound when loosened.
+ [* icon_caution] The screen assembly will flex as it is pried off. Do not bend the screen too far or the glass screen could shatter.