Skip to main content

Modifiche al passo #3

Modifica in base a Andrew Bookholt-

In attesa di approvazione

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Insert wisdom herethe flat end of a spudger into the gap between the front and rear bezels.
[* black] Rotate your spudger until it is parallel to the front face of the display.
[* black] Run the spudger around the perimeter of the display to separate the rear bezel from its retaining clips
.
[* black] Insert wisdom herethe flat end of a spudger into the gap between the front and rear bezels.
[* black] Rotate your spudger until it is parallel to the front face of the display.
[* black] Run the spudger around the perimeter of the display to separate the rear bezel from its retaining clips
.