Skip to main content

Modifiche al passo #1

Modifica in base a Luke Soules-

In attesa di approvazione

Eliminato
Aggiunto
Invariato

Righe Passo

[* red] Use a T6 Torx screw1.5mm hex screwdriver to remove the two hex screws on either side of the display (four screws total).
[* icon_note] These four screwsIf you don't have a 1.5mm hex heads, but we have found thedriver, you can probably get these screws out with a T6 Torx screwdriver fits perfectlyscrewdriver. However, if you use a T6 Torx driver you'll be more likely to strip the screws.
[* red] Use a T6 Torx screw1.5mm hex screwdriver to remove the two hex screws on either side of the display (four screws total).
[* icon_note] These four screwsIf you don't have a 1.5mm hex heads, but we have found thedriver, you can probably get these screws out with a T6 Torx screwdriver fits perfectlyscrewdriver. However, if you use a T6 Torx driver you'll be more likely to strip the screws.